The gap between the bathroom and the wall
The problem of clearance between the bathroom and the wall is familiarto each. Even the tiniest seam entails a lot of unpleasant consequences: a nasty smell of dampness, mold, smudges, puddles and eventually disgruntled neighbors who were flooded.
The most effective method of combating this phenomenon is to close the gap and forget about the problem.
We'll talk about a few simple ways, How to close the gap between the bathroom and the wall. These methods will master even the most fragile shoulders!
Crevice between the bathroom and the wall
Ways to solve the problem
The fastest and most affordable way for those whoPlans to fight with small gaps. The composition of the tape includes fungicides, so that the problem of mold will be solved by itself. The tape is glued to a dry, clean surface by removing the protective strip from the underside.
However, professionals do not really trust the glue applied by the manufacturer, therefore it is recommended to additionally use liquid nails.
- Sanitary silicone sealant
This method is also suitable for the narrowest slots. To achieve a better effect, the joints are pre-cleaned and dried, and then the sealant is applied from a special cylinder.
And do not forget that after using the sealant, the room needs to be well ventilated, as it dries out acetic acid, which has a rather unpleasant odor.
Useful: The seam will be more even if you use a paint tape to insulate the tiles.
This, in our opinion, is the simplest way to seal seams. It is only necessary to clean and dry the surface, then apply foam from the cylinder in Crevice between the bathroom and the wall. The material will expand and fill all available space. After which the material must be allowed to dry thoroughly.
And do not forget that the foam should be moisture resistant!
- Cement slurry
This is an excellent and effective way for large gaps! As before, the surface is cleaned, but not dried. Then we prepare a special formwork that will not allow our solution to fall down.
After moistening the area of the gap, we apply the solution and leave it until it dries completely. This method is rather unaesthetic, therefore it is recommended to paste a curbstitch tape or ceramic tile over the mortar.
- Ceramic border
And the last, perhaps the most aesthetic option, Than to seal a gap between the bathroom and the wall Is a ceramic curb. This curb sits on a special tile adhesive. Time and effort will have to do much more, but the result will surpass all expectations!
Determined the method? Then go ahead! A little effort and voila - the bathroom is fresh, nice and cozy!